Liebherr MKUv 1610 Manuale Utente Scaricare il pdf (Pagina 13)

1. Unscrewthehingebracket.

Important: The door mounting has

a spring mechanism enabling the

door to close by itself. The hinge

bracket turns to the left when the

screws are undone.

2. Pullthedooroutatthebottom

andlifto.

3. Transfer handle and plugs to the

opposite side of the door.

4. Transfer pin onhingebracket to the

opposite side.

5. Transfer upper hinge components to

the opposite side.

6. Transfer cover plate to the opposite

side.

7. Mount door on hinge pin and close.

8. Inserthingebracket in lower door

mounting.

9. Turnhingebracketby90°-spring

is compressed. Screw on hinge

bracket.

Changing over door hinges Installation dimensions (mm)

Version 1

A cross-section of min. 200 cm

is re quired in the

worktopforventilationoftherearoftheappliance.

Version 2

Ifnoventilationgrillisprovidedintheworktop,therecess

must be at least 860 mm high to ensure adequate heat

dissipation to the front.

1 2 ... 8 9 10 11 12 13

Nessun commento

Liebherr MKUv 1610 Manuale Utente Pagina 13